Every train ticket has a layer of "Jinming Film"
2015.08.18
Citizens who have taken the bullet train must be familiar with the blue ticket. When taking a bus, you only need to insert a seemingly ordinary ticket into the detection device to read it, and it only takes a few seconds to complete the identity verification and enter the platform. However, you may not know that the production equipment for the back coating of this paper ticket with personal information comes from a Shantou company-Guangdong Jinming Precision Machinery Co., Ltd.
Guangdong Jinming Precision Machinery Co., Ltd. is a professional supplier of plastic machinery equipment integrating R&D, design, production and sales, and is also a national high-tech enterprise. In 2011, Jinming Precision Machinery was successfully listed on the Growth Enterprise Market of Shenzhen Stock Exchange; in 2014, the Jinming Precision Machinery R&D team won the highest award of Shantou City Innovation Award... Behind the success and honor is the dedication of the company to strive for excellence, and it is also the interpretation of the growing brand . In the words of company executives, the success of the Jinming Seiki brand “is inseparable from technological innovation and talent cultivation.”
28 years of development, from a small workshop to a listed company
On the morning of August 11th, Shantou was lightly raining. In the Jinming Precision Machinery factory area diagonally opposite the Hepu exit of the Shenshan Expressway, Sun Weilong, the vice chairman of the company, was sitting in the office handling business in the company's overalls. Looking around, this executive office seems to be a bit "simple", with no luxurious decoration, no expensive furnishings, and the most conspicuous items in the room are only two sales maps of China and the world on the wall. Perhaps, this is just like the development track of Jinming Seiki in the past 28 years - low-key and pragmatic.
The predecessor of Jinming Precision Machinery was Jinming Plastic Equipment Factory, which was born in a small bamboo shed in Jinsha in 1987. At that time, there was a piece of production equipment purchased from Japan in the factory, and a part was damaged. Due to the lack of funds to purchase the original part, the founder Ma Zhenxin tried to use an earthen lathe to make a part instead. Unexpectedly, this bold attempt not only allowed the machine to work again, but also allowed him to see the huge potential business opportunities in this industry.
In the early 1990s, Ma Zhenxin successfully developed the blow molding machine control system for cosmetics and beverage packaging, which made the small factory "Jinming" recognized by the market, and the company began to enter the first opportunity for rapid development. By 1993, the blow molding equipment developed by "Jinming" had achieved the best sales in the country.
In the following 20 years of development, "Jinming" has continuously adapted to market changes, focusing on the R&D and manufacturing of film blow molding and hollow blow molding equipment, and has become a highly competitive and excellent plastic machine manufacturer in the world. In 2011, "Jinming" was successfully listed on the Growth Enterprise Market of Shenzhen Stock Exchange, named Jinming Jingji, which means that Jinming manufactures high-quality machines.
Technological innovation, spending huge sums of money to buy "small discs"
The success of a machinery manufacturing company is inseparable from technical support, and the success of the Jinming Seiki brand is due to continuous innovation in technology. At the beginning of its establishment, Jinming Seiki has paid great attention to technology introduction and scientific research development. In order to make its products in line with international standards, the company once spent huge sums of money to import technology from Germany. Did not tell the Chinese "students" from afar the manufacturing process and core technology. After returning to China, the scientific research personnel could only produce according to the CD-ROM method, but the manufactured products were always "acclimatized". Later, the company simply invited German experts to China.
From learning the advanced technology and experience of internationally renowned companies such as Siemens, Pumis, and Refine, to independent research and development, and continuous innovation, the products manufactured by Jinming Seiki now have the quality to compete with European and American brands, and the products are not only exported to 40 countries around the world. Many countries, even Japan, Germany and other countries with the most rigorous production technology. At the 2013 Dusseldorf International Plastics and Rubber Exhibition, a well-known technical team from Germany also came to visit the products of Jinming Seiki.
In recent years, Jinming Seiki has also paid attention to product line layout and industrial chain extension. In 2013, the company further expanded its business scale and acquired 80% equity of Shantou Far East Light Chemical Equipment Co., Ltd. And this acquisition has also added a layer of "Shantou film" to the train tickets across the country, because the machine that produces the coating on the back of each train ticket comes from this subsidiary.
Talent training, half of the company's executives are from other places
"Relying on science and technology to revitalize the enterprise" is the development belief of Jinming Seiki for more than 20 years. In terms of internal management, Jinming Seiki also attaches great importance to the cultivation of national talents. As early as the early stage of development in the 1990s, the company hired professionals with high salaries from all over the country to join. At present, more than half of the company's executives are from outside the province.
In 2014, the R&D team of Jinming Seiki's multi-functional and environmentally friendly film intelligent blow molding equipment won the only "Outstanding Talent Award" in the first "Outstanding Talent Award" in Shantou City, and won a special fund of 5 million yuan. This is also a team that brings together technical elites from all over the country. The main force of the team is Li Hao, a professional talent from Anhui Province. He has been working in Jinming Precision Machinery for 17 years since he graduated from university. In addition to recruiting social professionals from all over the country, "Jinming Precision Machinery" has also set up scholarships at Beijing University of Chemical Technology, Xi'an Jiaotong University, and Sichuan University, and is committed to creating a good environment for attracting and making good use of talents.
Thanks to the cultivation of talents, Jinming Seiki became the experimental center last year, which is the first initiative in China. The Jinming R&D team will use the platform of the Experimental Center to develop products for the purpose of product application and market demand, and provide customers with a "private customization" platform, thereby forming a multi-party integration of the industrial chain.
Guangdong Jinming Precision Machinery Co., Ltd. is a professional supplier of plastic machinery equipment integrating R&D, design, production and sales, and is also a national high-tech enterprise. In 2011, Jinming Precision Machinery was successfully listed on the Growth Enterprise Market of Shenzhen Stock Exchange; in 2014, the Jinming Precision Machinery R&D team won the highest award of Shantou City Innovation Award... Behind the success and honor is the dedication of the company to strive for excellence, and it is also the interpretation of the growing brand . In the words of company executives, the success of the Jinming Seiki brand “is inseparable from technological innovation and talent cultivation.”
28 years of development, from a small workshop to a listed company
On the morning of August 11th, Shantou was lightly raining. In the Jinming Precision Machinery factory area diagonally opposite the Hepu exit of the Shenshan Expressway, Sun Weilong, the vice chairman of the company, was sitting in the office handling business in the company's overalls. Looking around, this executive office seems to be a bit "simple", with no luxurious decoration, no expensive furnishings, and the most conspicuous items in the room are only two sales maps of China and the world on the wall. Perhaps, this is just like the development track of Jinming Seiki in the past 28 years - low-key and pragmatic.
The predecessor of Jinming Precision Machinery was Jinming Plastic Equipment Factory, which was born in a small bamboo shed in Jinsha in 1987. At that time, there was a piece of production equipment purchased from Japan in the factory, and a part was damaged. Due to the lack of funds to purchase the original part, the founder Ma Zhenxin tried to use an earthen lathe to make a part instead. Unexpectedly, this bold attempt not only allowed the machine to work again, but also allowed him to see the huge potential business opportunities in this industry.
In the early 1990s, Ma Zhenxin successfully developed the blow molding machine control system for cosmetics and beverage packaging, which made the small factory "Jinming" recognized by the market, and the company began to enter the first opportunity for rapid development. By 1993, the blow molding equipment developed by "Jinming" had achieved the best sales in the country.
In the following 20 years of development, "Jinming" has continuously adapted to market changes, focusing on the R&D and manufacturing of film blow molding and hollow blow molding equipment, and has become a highly competitive and excellent plastic machine manufacturer in the world. In 2011, "Jinming" was successfully listed on the Growth Enterprise Market of Shenzhen Stock Exchange, named Jinming Jingji, which means that Jinming manufactures high-quality machines.
Technological innovation, spending huge sums of money to buy "small discs"
The success of a machinery manufacturing company is inseparable from technical support, and the success of the Jinming Seiki brand is due to continuous innovation in technology. At the beginning of its establishment, Jinming Seiki has paid great attention to technology introduction and scientific research development. In order to make its products in line with international standards, the company once spent huge sums of money to import technology from Germany. Did not tell the Chinese "students" from afar the manufacturing process and core technology. After returning to China, the scientific research personnel could only produce according to the CD-ROM method, but the manufactured products were always "acclimatized". Later, the company simply invited German experts to China.
From learning the advanced technology and experience of internationally renowned companies such as Siemens, Pumis, and Refine, to independent research and development, and continuous innovation, the products manufactured by Jinming Seiki now have the quality to compete with European and American brands, and the products are not only exported to 40 countries around the world. Many countries, even Japan, Germany and other countries with the most rigorous production technology. At the 2013 Dusseldorf International Plastics and Rubber Exhibition, a well-known technical team from Germany also came to visit the products of Jinming Seiki.
In recent years, Jinming Seiki has also paid attention to product line layout and industrial chain extension. In 2013, the company further expanded its business scale and acquired 80% equity of Shantou Far East Light Chemical Equipment Co., Ltd. And this acquisition has also added a layer of "Shantou film" to the train tickets across the country, because the machine that produces the coating on the back of each train ticket comes from this subsidiary.
Talent training, half of the company's executives are from other places
"Relying on science and technology to revitalize the enterprise" is the development belief of Jinming Seiki for more than 20 years. In terms of internal management, Jinming Seiki also attaches great importance to the cultivation of national talents. As early as the early stage of development in the 1990s, the company hired professionals with high salaries from all over the country to join. At present, more than half of the company's executives are from outside the province.
In 2014, the R&D team of Jinming Seiki's multi-functional and environmentally friendly film intelligent blow molding equipment won the only "Outstanding Talent Award" in the first "Outstanding Talent Award" in Shantou City, and won a special fund of 5 million yuan. This is also a team that brings together technical elites from all over the country. The main force of the team is Li Hao, a professional talent from Anhui Province. He has been working in Jinming Precision Machinery for 17 years since he graduated from university. In addition to recruiting social professionals from all over the country, "Jinming Precision Machinery" has also set up scholarships at Beijing University of Chemical Technology, Xi'an Jiaotong University, and Sichuan University, and is committed to creating a good environment for attracting and making good use of talents.
Thanks to the cultivation of talents, Jinming Seiki became the experimental center last year, which is the first initiative in China. The Jinming R&D team will use the platform of the Experimental Center to develop products for the purpose of product application and market demand, and provide customers with a "private customization" platform, thereby forming a multi-party integration of the industrial chain.